Sound System - 4 way - designed for large nightclubs
| Start Price |
USD 22,500.00 |
| Current Price |
USD 22,500.00 |
| Time Left |
- |
| Bid Count |
0 |
| Buy It Now Price |
- |
| Reserve Price |
- |
| Start Time |
Thursday, September 04, 2008 |
| End Time |
Sunday, September 14, 2008 |
| Location |
Egg Harbor Township, NJ |
|
See more about 'Sound System - 4 way - designed for large nightclubs'
|
Description
Sound System - 4-way system for Large Nightclubs ( eBay Inventory - 080904 ) The following inventory list pertains to a 4-way active sound system that I personally designed, fabricated, engineered, and serviced for many years. It was designed for club dance bands and consists of two 4-way stacks per side, ( 3-way Hi-Pacs: Hi's - Hi-Mid's - Low-Mids, with separate Sub Bass enclosures ). Although the system does not include a console, ( or; mics, stands, and direct boxes ), it was designed for a console that hosts two monitor sends [pre], and two effects sends [post], as well as four sub-groups [with 31 band graphic EQ and dbx-160x compressors looped in and out ], and a stereo output which also utilizes a 31 band graphic on it’s output stage. The system also includes 10's of thousands of dollars worth of cabling, ( all matching 20 pair mults, EP-8 speaker cable, twist-locks, etc. ). It was specifically designed to be idiot proof, with a typical set-up time of only about a half hour. Basically, a set of tails plugs into your console, and then mults into the outboard rack. Then, the outboard rack mults into the house and/or monitor rack(s) via a 250 foot return snake. NOTE: As a built in safety feature, the system is wired so you can’t put a cable into the wrong input or output, ( the same is true with the house speaker enclosures, etc. ). This baby has worked lounges, clubs, auditoriums, and small showrooms, and it’s strength is in it’s organized and very easy to understand layout. The system is about fifteen years old, and although newer designs with much more compact audio gear is now available, this fat sounding rig can still kick it, and then some. Basically this system originally cost close to a couple hundred grand to build, but as we all know, audio gear doesn’t hold a great resale value. That’s why the asking price is so ridiculous. So, if you are looking for a packaged system to tour with, that produces a big sound, and sets up in a flash, ….. or, if you have a night club that is in need of some fullness and punch, then my loss is your good fortune. As for me, I’m about to settle down with a wonderful woman, and my butt is staying off the road for good. " Love you, Rachael ! Yeah, yeah, I know, ….. don’t forget to pick up milk on the way home from my new day gig, ........ ( sigh ). " · Front of House Speaker Enclosures – 4-way system : (4) Hi – Hi-Mid – Low-Mid speaker enclosures **** **** ( JBL flat face Bi-Radial with 2” throat loaded with JBL drivers plus 10” and 15” speakers ) **** ( one of the horns is broken at the throat area ) (6) Sub-Bass enclosures loaded with JBL 2241 H / 18” speakers – 600 watts · Monitor Speaker Enclosures – 2-way passive system : (6) EV – S1202 (4) EV – FM1202 ***** ***** ( 4 additional FM-1202’s that are blown ) · Outboard Rack: (1) Yamaha SPX-900 Digital Effects (1) Lexicon PCM-70 Digital Reverb (4) Yamaha Q2031 31 Band Graphic Equalizer (4) dbx-160x compressor / limiter (2) AUDIOARTS 4-way active crossover (1) BBE-822A Sonic Maximizer (1) Symetrix-402 Time Delay Unit (1) Toa D4 4 channel mixer (1) Toa D4E 6 channel expander unit · Front of House - Amp Rack: (3) QSC-3500 Power Amplifier / 400 watts at 4 ohms (1) QSC-3800 Power Amplifier / 600 watts at 4 ohms (1) QSC-4000 Power Amplifier / 1000 watts at 4 ohms · Monitor - Amp Rack: (1) AUDIOARTS 2-way stereo - active crossover (1) Yamaha Q2031 31 Band Graphic Equalizer (1) Rane 6 channel headphone amplifier (4) QSC-1400 Power Amplifier / 225 watts at 4 ohms · Return Cable: (2) 250’ 20 pair mult to mult (4) 50’ 20 pair mult to mult * (1) 10’ 20 pair mult to mult (1) 10’ 20 pair mult to XLR and ¼ tails / Soundcraft Outputs (1) 20 pair mult to female XLR tails (2) 20 pair mult to male XLR tails * ( two of the four 50’ - 20 pair - mult to mult” cables need repair ) (1) 20 pair multi to stage box-female XLR ** ** ( channels # 10 and # 20 need repair ) · A/C Cable: (1) 250’ 12/3 SO Twist-Lock to Twist-Lock, ( 30a / 125 volt ) *** *** ( needs twist-to-edison adapters for both ends ) (2) 100’ 12/3 SJ male edison to female edison (1) 50’ 12/3 SJ male edison to female edison (1) 25’ 12/3 SJ male edison to female edison (7) 10’ 12/3 SJ male edison to female edison (4) 5’ 12/3 SJ male edison to female edison (4) 6” 12/3 SJ Quad Boxes · Speaker Cable: Front of House – EP-8’s : (2) 100’ EP-8 to EP-8 (12) 50’ EP-8 to EP-8 (4) EP-8 to tails 4-way system / twist-locks (4) EP-8 to tails 2-way system / twist-locks (2) EP-8 to tail additional sub-bass / twist-lock Monitors – twist-lock : (2) 100’ twist-lock to twist-lock (7) 50’ twist-lock to twist-lock (4) 25’ twist-lock to twist-lock (2) 10’ twist-lock to twist-lock (2) 5’ twist-lock to twist-lock (2) male to male twist-lock - turn-around XLR Cable: (32) misc. lengths male XLR to female XLR
Place a Bid!
|
|
|
Search
Categories
More related categories
 |