Lab Gruppen FP 6400 Power Amplifier - NEW Start Price USD 2,199.00 Current Price USD 2,199.00 Time Left - Bid Count 0 Buy It Now Price USD 2,299.00 Reserve Price - Start Time Friday, August 29, 2008 End Time Monday, September 08, 2008 Location Leipzig See more about 'Lab Gruppen FP 6400 Power Amplifier - NEW' Description The fp 64 incorporates Lab.gruppen Class TD high efficiency amplifier design, which eliminates the heat and cooling problems found in other extreme high power amplifiers. The Class TD amplifiers maintain the same sonic quality as a traditional Class AB amplifiers. Besides the traditionally superb Lab.gruppen sonic performance, fP6400 offers a full line of important features:Regulated switch mode power supplyThe unique Lab.gruppen switch-mode power supply technology offers a number of essential advantages that make it superior to other and seemingly similar power supply designs. The most important features are the regulated power supply and the extreme power efficiency. Perhaps even greater benefits result from the extreme efficiency of Lab.gruppen amplifiers: only a fraction of the energy from the AC mains is turned into heat. A regulated power supply also presents some other sonic advantages, such as better cone control and the same fast response as a conventional power supply.Multiple positions Gain switchTo meet the demands for a flexible gain structure in the system, Lab.gruppen offers a multiple position gain switch. The maximum amplifier gain can be set to all industry standards: 20, 23, 26, 29, 32, 35, 38 and 41 dB. Lab Gruppen FP 6400 Power Amplifier Features: DC protection: protects against infrasonic signals VHF protection: protects the loudspeakers against strong very high frequency non-musical signals above the audible range. Thermal protection: prevents the amplifier from being overheated. The protection indicators on the front panel are switched on, as a warning, before the protection process is initiated. AC protection: shuts down the power supply if the line voltage is outside the operating voltage. Clip limiter: prevents severely clipped waveforms from reaching the loudspeakers, whilst maintaining full peak power 2 x 1300 watts @ 8 Ohms 2 x 2300 watts @ 4 Ohms 2 x 3200 watts @ 2 Ohms (Measured just below clip level, with both channels driven) Compact design, 2U high Low weight,10 kg (22 lbs) MLS Switch:Lab.gruppen's unique power matching for different loads Multiple positions gain switch Intercooler cooling system with front-to-rear airflow and easily accessible dust filters Improved low-end power bandwidth Link connector with XLR-type connector Bridged mono outputs in one Speakon connector Extruded front panel for increased stability Max output power 1) EIA EIA EIA EIA FTC EIA at 1 kHz and 1% THD 20 20 kHz at 0.1% THD MLS-switch 5 dB 4 dB 2 dB 0 dB Full 0 dB Full 16 Ohms per channel 220 W 260 W 410 W 650 W 640 W 8 Ohms per channel 430 W 520 W 820 W 1300 W 1280 W 4 Ohms per channel 830 W 1000 W 1600 W 2300 W 2200W 2 Ohms per channel 1660 W 2000 W 2400,30503) W 29002),32003) W 2500 W 16 Ohms bridged 860 W 1040 W 1640 W 2600 W 2500 W 8 Ohms bridged 1660 W 2000 W 3200 W 4600 W 4400 W 4 Ohms bridged 3400 W 4000 W 4800,61003) W 58002),64003) W 5000 W Max output voltage 8 ohms load 62 Vrms 70 Vrms 85 Vrms 104 Vrms Peak voltage,no load 88 V 101 V 121 V 149 V Distortion etc. THD 20Hz-20kHz and 1W to full power 0.1 % THD @ 1kHZ and 1dB under clip 0.04 % DIM 30 at 3dB under clip 0.06 % Hum and Noise < 110 dB Channel separation @10kHz 70 dB Output impedance 60 m_ Slew Rate 20 V/s Inputs Gain,selectable [dB] 20,23,26,29,32,35,38,41 Impedance 20 kohm Common mode rejection 50 dB Front Panel Gain controls (2) channel A,B 31 pos detent Clip Indicator (2) red LEDs Output headroom indicators (10) green LEDs Fast peak slow release Temp Indicator (2) yellow LEDs 80øC at heatsink VHF indicator (2) yellow LEDs >12 kHz at full power On Indicator (2) green LEDs DC rail voltage for channel A and B AC Indicator (1) green LED AC power present AFS Indicator (1) green LED Fuse saver activated Rear Panel Input connectors (2) Neutrik Combo XLR type,3 pin and 1/4 _ jack Link connector (2) XLR type,3 pin male Output connectors (2) Neutrik 4-pole Speakon© connectors Switches: Clip limiter A and B On Off(switchable) MLS switch 0, 2, 4, 5 dB Link-switch Ch.A B Power 115 V / Version Peak inrush current (Soft start limited) 5 A 5 A Current Draw @ 4ohms Quiescent power (no load) 1 Arms 2 Arms 1/8 offull power ( 9 dB) 6 Arms 12 Arms 1/3 offull power ( 5 dB) 14 Arms 28 Arms At full power (0 dB) 20 Arms 40 Arms @1 kHz 1% THD (AFS limited) (AFS limited) Net Dimensions mm 483 W x 88 H x 347 D inch 19" W X 3.5" H x 13.7"D Shipping Dimensions mm 560 W x 180 H x 500 D 22" W x 7.1"H x 19.7 D Weight Net 10 kg (22 lbs) Shipping 11.6 kg (25.6 lbs)  This item is new but not in original packaging.  It has been used once or twice.  WILL SHIP WORLDWIDE Place a Bid!