|
Equipment
>>>
Other
|
Joe Meek TwinQ Mic Pre Amp Studio Channel Preamp
Make Offer-OPEN BOX SAVE-FREE SHIP
| Start Price |
USD 749.99 |
| Current Price |
USD 749.99 |
| Time Left |
- |
| Bid Count |
0 |
| Buy It Now Price |
- |
| Reserve Price |
- |
| Start Time |
Monday, October 06, 2008 |
| End Time |
Monday, October 13, 2008 |
| Location |
Lombard, Illinois |
|
See more about 'Joe Meek TwinQ Mic Pre Amp Studio Channel Preamp'
|
Description
Joe Meek TwinQ Two Channel Mic Preamp with EQ-NEW WITH WARRANTY The Joemeek twinQ is everything you ever wanted in a dual studio channel - and then some!We started with high quality Burr-Brown IC's for the preamp, added an extremely musical EQ section and an optical compressor for that signature "Meek" sound. Then we included some new and innovative features, like an "Iron" switch that switches the IC front end to a transformer - completely changing the topology of the circuit. It even has 24bit, 96k A/D converters built in.All of this comes housed in a rugged 2u chassis with a beautifully sculpted aluminum faceplate.With sonic quality rivaling mic pre's priced thousands of dollars more, the twinQ sets a new standard for dual channels! twinQ Specifications Input impedances: Mic: 1.2kohm; Line: 20kohm Pre-amp overall gain: 0dB to 60dB Common mode rejection: 70dB Equivalent input noise: -128.5dBu (unweighted) Distortion: 0.001% (below Compressor threshold) Frequency response: 10Hz to 70kHz (-3dB) Maximum input before clipping: Mic: +21dBu; Line: +45dBu Headroom before clipping: +21dBu Compressor threshold: ∞dBu to -20dBu (variable) Compressor ratio: 1:1 to 10:1 (variable) Compressor attack time: 1 msec to 100 msec (adaptive) Compressor release time: 0.1 sec to 3 sec (adaptive) Nominal output levels: +4dBu/-10dBv Output impedance: 75ohm Output Level switch: 12dB attenuation Noise Floor: -85dBu (typical, with ~40dB mic gain) VU Meter: Analogue movement Power supply: 115V / 230V ac mains, 50/60Hz Power consumption: 30W Mechanical: 482W x 88H x 220D (overall) Weight: 3 kilos High Pass Filter: 12dB per octave cut below 80Hz EQ Boost & Cut: +/-15dB (zero phase-shift bell response) LF Frequency : 40Hz to 650Hz variable MID Frequency : 300Hz to 5kHz variable HF Frequency : 6kHz/12kHz switchable Digital Output Specifications Sampling: 24 Bit Sampling Rate: 44.1kHz, 48kHz, 88.2kHz or 96kHz selectable Output Formats: AES3 compliant (balanced), S/PDIF electrical, S/PDIF optical External Word Clock input: 75ohm, 1.25V - TTL level, 44.1kHz to 96kHz (auto synchronising) Digital InterfaceThe Joemeek Digital Audio Interface provides high quality digital audio outputs plus the ability to synchronize to an external word clock. The digital audio outputs are compatible with most digital recorders, as well as Digital Audio Workstations and mixers. S/PDIF format is available from the optical and RCA phono connectors, while the transformer coupled XLR connector provides an AES3 compatible output. The Joemeek Digital Interface has highly stable onboard master clocks for low-jitter, hi-fi results. Internal sample rates of 44.1kHz, 48kHz, 88.2kHz or 96kHz are selected by means of rear panel switches. 44.1kHz is the standard used for audio CD's, while 48kHz and 96kHz are widely used in recording studios. In general, the higher the sample rate, the better the audio fidelity, but the more disk space is required for the recording. For example, recording at 96kHz requires twice as much storage as 48kHz. Consult the manual of your recorder or DAW as to what sample rates it will accommodate.Alternatively the twinQ may be set to the frequency of an external master word clock, generated, for example, by the studio's recorder or DAW. When connected to the BNC socket provided, a suitable external word clock will be detected automatically and will override the twinQ's internal word clock. The front panel LED labelled 'EXT CLK' illuminates when the twinQ is successfully locked to an external word clock. To avoid distortion, care should be taken not to overdrive the input to the Digital Interface. The red LED next to the Output Gain control is labeled "PEAK FSD" which stands for "Full Scale Digital". Occasional flashes are OK but if it is on all the time, turn something down! We are offering a MINT Condition, Open Box TwinQ with factory Warranty. Shipping the the Continental US is FREE! Shipping Overseas add $50.00 plus international shipping charges. Shipping to Canada add $10.00 plus interantional shipping charges. SquareTrade © AP6.0 Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
Place a Bid!
|
|
|
Search
 |
[home] [sitemap]
|