DMX Isolated Splitter by Doug Fleenor Start Price USD 400.00 Current Price USD 400.00 Time Left - Bid Count 0 Buy It Now Price - Reserve Price - Start Time Friday, August 29, 2008 End Time Monday, September 08, 2008 Location New York, NY See more about 'DMX Isolated Splitter by Doug Fleenor' Description Found in our stock is a DMX512 Splitter.  this product is new and have never been used. The Splitter/Amplifier provides between one and eleven DMX512 outputs from a single DMX512input. The outputs are electrically isolated from the input and from each other by 2500 volt opticalcouplers.All models of our Splitter/Amplifier boost the signal as well as isolate it. Input levels as low as 0.2volts are transmitted at full EIA-485 levels (about 4.5 volts).The splitters allow the DMX signal to be split without the possibility of reflections from one signalpath interfering with the signal to a device on a different path. By isolating each output, electricalnoise and hazardous voltages on one output are prevented from affecting (or damaging) devices onthe input or another output.Common uses for the Splitter/Amplifier include:!     Boosting the signal level on long control runs (greater than 500 feet)!     Splitting the signal to multiple dimmer locations!     Splitting the signal between dimmers and other DMX devices (color changers, moving lights, etc.)!     Isolating two or three dimmer packs from each other.Although this product was designed for the digital multiplex lightingcontrol standard DMX512, theunits use standard EIA-485 components. They can be used to split and isolate any single-drop uni-directional EIA-422 or EIA-485 line up to the rated data rate of 250 Kb/s. SPECIFICATIONS: All specifications meet or exceed DMX512 requirements Input circuit: EIA-485 receiver with 120 ohm termination resistor between +Data and -Data (Units with feed through connectors do not have internal termination) Input signal: 0.2 volts minimum, 12 volts maximum Output circuit: EIA-485 driver Connectors: Gold plated 5 pin Neutrik D-1 Series (3 pin connectors or terminal blocks optional) Feed through: A non-isolated feed through connector is standard on the eleven output model and is optional on the one, three, and five output models. Isolation:  2500 volt optical coupler, 1500 volt split bobbin transformer Power input: 100 - 120 volts, 50/60 hertz, 12 watts (208 - 240 volt optional) Color:  Top, bottom and sides: Silver hammer tone Front and back: Black MODELS model: # Outputs: Size: Weight: 123 3 6.5" deep, 1.7" high, 6.5" wide 2.6 pounds DMX512 Isolated Splitter -- Selected FeaturesThe following information is provided to assist you in determining if the DMX512 Isolated Splitter would be of benefit in your installation. If you have any questions, please feel free to call, write, or FAX us. FEATURE  BENEFIT Input is electrically isolated from output. Console is protected from failed dimmers, lightning damage, and any other cause of high voltage on the control cable. Outputs are isolated from each other. Color changers, moving lights, other dimmers are protected from each other. Outputs are separately buffered. Reflections, short circuits, etc. on one output cannot affect another output. No user adjustments. Easy "fool proof" installation. DMX pinouts are printed on the splitter Assists in proper control wiring. Powder coated 1/10" aluminum chassis. Rugged and attractive for years of service. Gold plated Neutrik 5 pin connectors. Assures reliable connections. All integrated circuits are socketed. Eases field service. Uses 2500 Volt optical couplers. Easily isolates line voltage failures. Usually withstands electrical storm damage. Forty times faster than DMX data rate. Reliable, high speed data throughput. Units can be cascaded. "Air gap" circuit board under isolator. Prevents arcing across circuit board. 60 mA drive current. Reliably drives long control cables. Power and input signal indicators. Simplifies system trouble shooting. Mr. Fleenor is active in ESTA, PLASA, and USITT. Products are designed to latest specifications. In the lighting industry since 1979. We'll be here if you need us. 5 year warranty.  (warranty still applies) Peace of mind. Place a Bid!